Rear end is here!! IT finally came from ups freight, more about that later. Today we started out finishing up the front end buy attaching the flex lines to the calipers and then to the frame where they will eventually mate up with the hard lines. After a few practice bends on some spare brake line we ran our first line from the FRONT master cylinder to the driver side tee fitting ( Attaching to the flex line). So the line is tee'd off so we can continue across the frame to the passenger side flexline.
The rear end came in full force at 235 pm today after a long wait on backorder. Now the instructions for the rear end are worded as follows "Step 1: Put the bracket on the rear end", you can imagine how vague that is when you have literally boxes full of parts which are full of unnamed brackets. So after a " Clarification" call to factory five we worked it out, attached the lower control arms to the axle and the frame, assembled the coil over assemblies and called it a day.
1 comment:
Keep up the good work.
Post a Comment